The short answer
To read an Alberta condominium plan, start with the fact that it is a registered survey that creates the units: it draws the boundary of each unit, numbers it, designates everything else as common property, and sets each unit's unit factors in a schedule. The plan is registered at the Land Titles Office under its own number, which appears on every unit's title, and the bylaws, the fee and the votes all refer back to it. The sheets you will see are the title sheet with the legal description and certifications, the site plan, the floor plans with units outlined and numbered, the unit factor schedule, and any additional plan sheets registered later for parking stalls, storage units or changed units. Reading it answers four buyer questions: where your unit ends, what you own outright, what you share, and what share of the costs and votes is yours. Nothing on this page is legal advice; a lawyer reads the plan with the title before closing.
Other ways people ask this
People word this question in different ways. This page answers each of them:
- How do I read a condominium plan in Alberta?
- condo plan unit factor common property alberta
- How do I know where my condo unit ends and common property begins?
- What are unit factors on an Alberta condo plan?
- condominium plan explained alberta
The parts of the plan
| Part | What it shows | What to look for |
|---|---|---|
| Title sheet | Plan number, legal description, surveyor's and owner's certifications, registration date | The plan number matches your title; the registration date tells you the building's legal age |
| Site plan | The parcel, the buildings on it, roads, parking areas, landscaping | What is inside the parcel; whether visitor parking and amenities are on it |
| Floor plans | Each level with units outlined and numbered | Your unit number, its boundary, what is beside, above and below it |
| Unit boundary notes | Whether boundaries are inner surfaces, centre of walls, or something else | Decides what is yours to repair; who pays for what |
| Common property | Everything not within a unit: corridors, structure, roof, grounds, parkade | Balconies, patios and stalls are usually here unless titled |
| Unit factor schedule | The factors assigned to each unit, totalling the figure the Act sets for the plan | Your share of the fee and the vote; unit factors explained |
| Additional plan sheets | Later redesignations: titled parking, storage, altered units | Whether the stall and locker you are promised are units |
Conventional and bare-land boundaries
A conventional plan draws units inside a building, commonly from the inner surfaces of the walls, floor and ceiling, so the structure, the pipes in the walls and the windows are usually common property. A bare-land plan draws units as lots on the ground, like a subdivision, so the lot and whatever is built on it are the owner's and the common property is the roads, landscaping and shared services. The plan says which it is on its face, and the difference runs through everything from the fee to the insurance; what is a bare land condo? and is my townhouse yard mine?
Where to get it and what to read with it
- Land Titles, through its online search by plan number, or through your lawyer.
- The corporation, as part of the document package under the Act; the plan is one of the documents the regulation's fee schedule covers.
- The title, which gives the plan number, the unit number and the unit factors; reading an Alberta land title.
- The bylaws, which assign exclusive use of common property and set maintenance responsibilities the plan does not; Alberta condo bylaws.
What a buyer finds on the plan
- That the unit number on the listing is the unit number on the plan; apartment numbers and legal unit numbers often differ.
- Whether the parking stall and storage locker are titled units, exclusive-use common property or neither; titled, assigned or leased parking.
- Where the boundary falls, and therefore whether a window, a balcony membrane or an in-wall pipe is yours.
- The unit's factors against comparable units, which explains a fee that looks high or low.
- What is beside, above and below: a mechanical room, an elevator shaft or a garbage chute is drawn on the plan long before you hear it.
A plan takes ten minutes to read once you know the sheets. Our REALTORS® read it with condo buyers during conditions alongside the rest of the package; how to research a condo building and the condo document review guide show where it fits.
Quick answers
What is a condominium plan in Alberta?
The registered survey plan that creates the condominium: it divides the land or building into units and common property, numbers each unit, assigns unit factors and is registered at the Land Titles Office. Every unit's title refers to it, and the bylaws, the fees and the votes all hang off it.
Where do I get a copy of a condo plan?
From the Land Titles Office through its online search service, from the corporation as part of the document package, or through your lawyer or REALTOR®. The plan number is on the unit's title.
What is a condominium additional plan sheet?
A later sheet added to the plan to redesignate parts of the common property, most often to create titled parking stalls or storage units, or to show units created or changed after the original registration. If a listing says the stall is titled, the sheet is where it appears.
Does the condo plan show square footage?
It shows unit boundaries and areas as surveyed at registration, which can differ from a listing's measurement because the plan measures to the boundary the plan defines, often the inner surfaces or the centre of walls, and the listing measures living space. Use the plan for boundaries, not for comparing sizes between buildings.