The short answer
To document a new roof or furnace when selling, gather three things for each item: the invoice naming the contractor, the date, the product and the scope; the permit and final inspection where the City required one; and the warranty terms, with a note of what transfers to a buyer and how. Put them in the listing's document package, name the year in the remarks, and leave a copy for the buyer at possession. Buyers' REALTORS® and inspectors give full credit for replaced components they can verify and almost none for "newer" in the remarks, because the inspector will date the furnace from its serial number anyway and the roof from the granule wear. The same applies to windows, the hot water tank, the electrical panel, the sewer line and anything else a buyer prices by age. The paperwork does not raise the price above the market; it stops the buyer deducting for uncertainty.
Other ways people ask this
People word this question in different ways. This page answers each of them:
- How do I prove I replaced the roof when selling my Calgary home?
- Roof and furnace receipts for selling a house
- What paperwork should I give buyers for a new furnace in Calgary?
- How do I get credit from buyers for a new roof in Calgary?
- Showing buyers proof of a new roof or furnace when selling in Calgary
Item by item
| Component | Documents to gather | Permit? | What buyers check |
|---|---|---|---|
| Roof (shingles) | Invoice with product and underlayment; manufacturer's warranty; contractor's labour warranty | Ask the City; like-for-like re-shingling on a house often does not need one, but confirm | Granule wear, flashing, ventilation; the warranty's transfer terms |
| Furnace | Invoice; permit and final inspection; manufacturer's warranty registration; service records since | Yes for gas and usually electrical; the installer pulls it | Serial number date, permit record, filter and service history |
| Hot water tank | Invoice; permit where required; warranty | Often, for gas; confirm with the installer | Date stamp, venting, the drain |
| Windows | Invoice naming each opening; warranty on glass and frame | Not usually for same-size replacement; confirm for enlargements | Seals, operation, which windows were done and which were not |
| Electrical panel or service upgrade | Invoice; permit and inspection | Yes | The permit; insurers ask about panels; electrical service |
| Sewer line, foundation repair, waterproofing | Invoice; engineering letter where there was one; warranty | Depends on the work | The engineer's letter above all; sewer lines |
What needs a permit in the first place is in what renovations need a permit in Calgary?; work done without one is in unpermitted work.
What transfers and what does not
- Manufacturer warranties on shingles, furnaces and windows often transfer once, sometimes within a period after the sale and sometimes on payment of a fee; some require registration by the original owner. Read the terms before the listing says "transferable".
- Contractor labour warranties are commonly personal to the client and end at sale unless the contractor agrees otherwise; a phone call sometimes extends them.
- Extended or service plans are contracts and transfer only if the plan says so.
- The remarks should say what transfers in plain words: "shingles 2022, manufacturer's warranty transferable to the next owner; installer's labour warranty not transferable."
Where the documents go
- The listing supplements, attached by your REALTOR® so every buyer's agent can open them before the showing.
- A binder or folder in the home on the mechanical room shelf or the kitchen counter during showings; buyers and inspectors read it.
- The pre-listing inspection, if you had one, cross-referenced to the invoices; pre-listing inspections.
- Possession day: the originals or copies left for the buyer, with the manuals; the possession guide.
The wider document list for a sale is in what documents do I need to sell?
What it does to the price
A new roof or furnace does not add its cost to the price; it removes a deduction the buyer would otherwise make, and it widens the pool to buyers whose lender or insurer would have asked questions. The age thresholds buyers and insurers use are in how old is too old for a furnace, roof or hot water tank?, and the broader question of which work pays in which renovations increase value? Your REALTOR® attaches the documents and writes the remarks; your contractor supplies the paper, and the sooner you ask for it, the easier it is to get.
Quick answers
How do I prove the roof is new when I sell?
The contractor's invoice with the date, the product and the scope; the shingle manufacturer's warranty, registered or transferable where the terms allow; and, if the City required a permit for the work, the permit record. Put them in the listing's document package and name the year in the remarks.
Does a furnace replacement need a permit in Calgary?
Replacing a gas furnace involves gas and often electrical work that requires a permit and inspection; the licensed installer normally pulls it. Ask the installer for the permit number and keep the final inspection with the invoice. A buyer's inspector will ask whether it was permitted, and the City's records can be checked.
Does the warranty transfer to the buyer?
Depends on the manufacturer and the installer. Many shingle and equipment warranties transfer once, sometimes within a set period after the sale and sometimes for a fee; labour warranties from the contractor often do not. Read the terms and say in the listing exactly what transfers, rather than promising a warranty you cannot hand over.